Hondata s300 Part 3 Software Navigation & SetUp Hondata s300

Hondata S300 Can Output Aem Gauge. AEM AnalogStyle Boost Gauges Output to Dataloggers 0 to 60PSI General; ↳ Hondata News; ↳ Applications; ↳ Non-Hondata; s100/s200/s300. I plan to use weather-pack connector, and wire the 0-5v white output from the gauges to the.

HONDATA S300 v3.0 CAN Interface to AEM CD Dashes Supported Devices HONDATA S300 V3 (White PCB) ECU CAN Bus Wiring The Hondata S300 V3 has its CAN connection on the Digital I/O header Sounds like a ground plane voltage difference and/or current loop

Hondata s300 v3 Package w OBD1 VTEC p28 ECU Combo

The s300 is a plug in module to the factory Honda Engine Computer (ECU) which vastly expands the capabilities of the factory ECU While the vehicle is running & the o2 sensor is warmed up, monitor the smanager's air fuel ratios The CANH (CAN+) is a white wire and the CANL (CAN-) is a blue wire

S300 Circuit Diagram Hondata. Use a multimeter and measure voltage between ground on the battery. The CANH (CAN+) is a white wire and the CANL (CAN-) is a blue wire

Hondata S300 with P28 Ecu. I'm using AEM 30-4401 Fluid Pressure gauges, 0-100psi, for Oil and Fuel Pressure coming off the aem harness should be a white wire that is your 0-5V output